Skip to content
← Back to Communication & System Solution PCL (cssthai.com)
CSS CSS FIRE BARRIERFirestop Systems

3M™ Fire Barrier Water Tight Sealant 1000 NS Firestop Silicone Sealant

3M Construction Joints3M Through PenetrationsSealant & Silicone3M Firestop Products

3M™ Fire Barrier Water Tight Sealant 1000 NS is a high-quality, highly flexible silicone that helps prevent the spread of fire smoke and toxic gases during a fire, as well as preventing water leakage. Used to seal openings that require fire and smoke protection, for penetrations and structural joints. When installed in accordance with the specified standards, it can block the spread of fire for up to 4 hours.

Product colour: White

Size: 298.7 ml / Tube

High-performance silicone sealant provides
a barrier against fire, water and sound
Ask about this product

Interested in this product? Contact our team for pricing or installation advice.

LINE @firebarrier 02-018-1111 ext. 3410

Applications

  • For applications requiring high flexibility, such as vibrating ducts and structural joints
  • Suitable for sealing around all types of melting pipes, such as PVC, PPR and PP
  • Sealing around air-conditioning pipework and insulated HVAC pipes
  • Floor and wall joints
  • Can be used with standard silicone sealant guns

Features

  • Water-resistant
  • Halogen-free, low VOC**
  • Compression / extension capability of ± 31%
  • Uses heat-activated expansion technology (intumescent)
  • Adheres well to all surface conditions, such as concrete, steel, wood, plastic and cable jackets
  • Can be added to, repaired and re-applied
  • Excellent at filling leaks and penetrates all surfaces
  • Excellent sound absorption
  • Can be cleaned with water
  • Tested for up to 3 hours per ASTM E 814 (UL 1479), ASTM E 1966 (UL 2079) and CAN / ULC-S115
  • Meets the UL water leakage test rating W – Class 1 requirements
  • Meets LEED® VOC environmental quality requirements

    Technical Data

    Color Light Gray
    Elongation at Break (ASTM D 412) 600%
    Service Temperature Range -60°F to 300°F (-51°C to 149°C)
    STC (ASTM E 90 and ASTM E 413) 56 when tested in STC 56 rated wall
    assembly
    Surface Burning (ASTM E 84 Mod) Flame Spread 0, Smoke Development 0
    Hardness (ASTM C 66 Shore A) 20–25 (1000 NS)
    Tensile Strength 85 psi (0.59 MPa)
    VOC Less H2O and Exempt Solvents < 250g/L
    Cure: Under typical cure rate conditions of 77°F (25°C) and 50% R.H., sealant becomes
    tack-free in about ten minutes, dry-to-touch in 30 to 60 minutes and obtains full-cure
    adhesion in 14–21 days. Full cure depends upon abient conditions and volume of sealant.
    Typical cure rate is approximately 1/8 inch (3mm) per day.

    Documents

    (PDF) Safety Data Sheet

Contact Us / Request a Quote

Product enquiries, quotations or a site survey

LINE QR @firebarrier
Head office Communication & System Solution Public Company Limited

329 Moo 3, Ban Mai, Pak Kret, Nonthaburi 11120, Thailand · View map