3M™ Fire Barrier Sealant FD 150+ Firestop Sealant
Product colour: Grey
Size: 298.7 ml / Tube
Size: 591.5 ml / Sausage

multiple colors, to meet virtually any
project or specification need.
Sizes: 298.7 ml / Tube, 591.5 ml / Saugsage
Documents (PDF)
📄 (PDF) Safety Data Sheet
Ask about this product
Interested in this product? Contact our team for pricing or installation advice.
3M™ Fire Barrier Sealant FD 150+ is suitable for sealing construction joints and through-penetrations such as metal pipes, conduit and communication cables. It helps control the spread of fire and limits the spread of toxic gases, smoke and water when installed in accordance with the specified standards.
Applications
- Seals joints between structures and buildings that require flexibility
- Floor and wall joints
- Sealing around metal pipes passing through
- Seals joints between various materials; can be used with Firedam 2000 Coating paint and other products in the fire and smoke barrier range
Features
- Halogen-free
- Flexible, with good sound absorption
- Adheres well to all surface conditions, such as concrete, steel, wood, plastic and cable jackets
- Can be added to, repaired and re-applied
- Can be painted over
- Can be cleaned with water
- Tested for up to 2 hours per ASTM E 814 (UL 1479) and
CAN / ULC S115, meeting the requirements of IBC, IRC, IFC, IPC, IMC, NFPA 5000,
NEC (NFPA 70) and NFPA 101 - Tested as a construction joint fire-resistance system for up to 4 hours per ASTM E 1966 (UL 2079)
- Meets LEED® VOC environmental quality requirements
Technical Data
| Color | Limestone |
| Extension/compression | Capability of ±19% |
| Application Temperature Range (ASTM C 1299) | 40° to 122°F (4° to 50°C) |
| Service Temperature Range | -20° to 180°F (-28° to 82°C) |
| STC Acoustic Barrier (ASTM E 90 and ASTM E 413) |
56 when tested in STC 56 rated wall assembly |
| Surface Burning (ASTM E 84) | Flame Spread 0 Smoke Development 0 |
| Hardness (ASTM D 2240 Shore A) | 60 |
| Tensile Strength | 85 psi (0.59 MPa) |
| Volume Shrinkage (ASTM C 1241) | 28% |
| VOC Less H2O and Exempt Solvents | <250 g/L |
| Dry: Under typical conditions of 75°F (23°C) and 50% R.H., sealant becomes tack-free in about ten minutes and dry-to-touch in 30 to 60 minutes. Full dry depends upon ambient conditions and volume of sealant. Typical dry rate is approximately 1/8 inch (3 mm) per day |
|
Documents
Installation examples of fire and smoke barrier sealant using 3M™ Fire Barrier Sealant FD 150+
Contact Us / Request a Quote
Product enquiries, quotations or a site survey
Telephone02-018-1111ext. 3410
Online sales083-989-9885Khun Jin
Add us on LINE@firebarrier
Facebook3M Fire Barrier by CSS
Head office
Communication & System Solution Public Company Limited
329 Moo 3, Ban Mai, Pak Kret, Nonthaburi 11120, Thailand · View map



