3M™ Fire Barrier Sealant CP 25WB+ Firestop Sealant
High-performance
3M™ Fire Barrier Sealant CP 25WB+ is a high-quality fire barrier sealant that helps prevent the spread of fire smoke and toxic gases during a fire. Used to seal openings that require fire and smoke protection, for floor and wall penetrations. Suitable for metal pipes, non-metallic pipes, insulated pipes, cables and conduit. Provides fire resistance of up to 4 hours when installed in accordance with the specified standards.
Product colour: Red
Size: 298.7 ml / Tube


Documents (PDF)
📄 (PDF)Safety Data Sheet
Ask about this product
Interested in this product? Contact our team for pricing or installation advice.
Applications
- Suitable for sealing around steel pipes and all types of melting pipes, such as PVC, PPR and PP
- Sealing around air-conditioning pipework and insulated HVAC pipes
- Can be used with other products in the fire and smoke barrier range
- Can be used with standard sealant guns
- Can be used with other products in the fire and smoke barrier range
Features
- Good sound absorption
- Uses heat-activated expansion technology (intumescent)
- Halogen-free
- Adheres well to all surface conditions, such as concrete, steel, wood, plastic and cable jackets
- Can be added to, repaired and re-applied
- Excellent at filling leaks and penetrates all surfaces
- Can be painted over
- Can be cleaned with water
- Tested for up to 4 hours in accordance with ASTM E 814 (UL 1479) and
CAN / ULC S115 - Tested as a construction joint fire-resistance system per
ASTM E 1966 (UL 2079) - Meets LEED® VOC environmental quality requirements
Technical Data
| Color | Red |
| Application Temperature Range (ASTM C 1299) |
40° to 122°F (4° to 50°C) |
| Service Temperature Range | -20° to 180°F (-28° to 82°C) |
| STC (ASTM E 90 and ASTM E 413) | 54 when tested in STC 54-rated wall assembly |
| Surface Burning (ASTM E 84) | Flame Spread 0 Smoke Development 0 |
| Hardness (ASTM D 2240 Shore A) | 45 |
| Tensile Strength | 85 psi (0.59 MPa) |
| Volume Shrinkage (ASTM C 1241) | 28% |
| VOC Less H2O and Exempt Solvents | <1 g/L |
| Dry: Under typical conditions of 75°F (23°C) and 50% R.H., sealant becomes tack-free in about ten minutes and dry-to-touch in 30 to 60 minutes. Full dry depends upon ambient conditions and volume of sealant. Typical dry rate is approximately 1/8 inch (3 mm) per day. |
|
Documents
Installation examples of fire and smoke barrier sealant using 3M™ Fire Barrier Sealant CP 25WB+
Contact Us / Request a Quote
Product enquiries, quotations or a site survey
Telephone02-018-1111ext. 3410
Online sales083-989-9885Khun Jin
Add us on LINE@firebarrier
Facebook3M Fire Barrier by CSS
Head office
Communication & System Solution Public Company Limited
329 Moo 3, Ban Mai, Pak Kret, Nonthaburi 11120, Thailand · View map



